Does anyone know what's the best equipment to clean dust of computer components etc?
I've already got compressed air, but is there anything else?
Look at this place... Fifty thousand people used to live in this city. Now it's a ghost town... I've never seen anything like it.
Guess rule number one would be to turn the computer and all of its peripherals off and let it cool first. Particularly if one is going to use a blower. I've never used a blower before - feels a bit heavy and over the top - although when I did research I found someone using a leaf blower to clean the interior of the CPU. I use a very cheap anti-static brush and I use it lightly - the brush is one of those brushes that attract dust. For the keyboard I use some earbuds for in between the keys and a little bit of rubbing alcohol. I also use special computer cleaner wipes to wipe the keys and exterior of the computer. I don't fiddle around with it much though and I only clean it once in a blue moon. For some or other reason my computer doesn't get much dust. Probably because I go all out to keep my study room as dust free as I possibly can.
I've seen compressed air destroying a fan once.
I usually clean my computer fans and sinks using the vacuum cleaner. I always put a finger to the fan to prevent it from spinning too fast which I imagine could be damaging.
Just cleaned using alcohol wipes.
Used many, but at least computer is fairly clean now. Why I dare not say fully clean is cause the dust in the air settled on the clean parts.
I would agree that sucking away dust must be better than blowing it away and conducive in making sure that the pc still works afterwards.
Blowing at it could only force it deeper into the boards and areas which can only lead to the possibility of more problems.
depending on how thorough you want to be you can take all the components out clean them individually. Wash the case out and let it dry before putting all the items in.
I had to take the heatsink off from my GPU since it was making my card toasty, unfortunately, this voids the warranty but I reapplied some thermal paste and got much better temps.
You can Use Your default windows cleaner with the Disk Cleanup option and you can use your Temp or Cach files in all drives.
But in secondary option you can use CCleaner or Ashampoo WinOptimizer in free or Pro option in your own choice.
I have a small computer kit that attaches to the home vacuum, that and a long bristle brush.
Depending on how much time, room and if my children are around (they like to try and help), depends how I clean. If I don't have much time I will use a small anti-static brush and keep a vacuum nearby. When I have lots of time and no one around I will strip down the PC and will leave just the motherboard in the case and clean outside of the case, allowing me to remove the heatsink and fan from the CPU to make sure I can remove all dust from the heatsink without it getting over the motherboard. Afterwards I clean the CPU and reapply thermal paste before rebuilding replacing the PC back. I usually clean the area where the PC was as well just to clear any dust around there too.